You are the location of£ºHome>NewsNews


          The Soniaccu ultrasonic nozzle can give a slim, soft line of spray in the help of the very low pressure air.                                          

         The liquid flow through the capillary of the pieoz-transducer,of the nozzle, the atomization is generated
     on the thin tip of the transducer horn, because of the longitude vibration of transducer horn, If there is
     not the influence of other air flow, the atomization spray angle will not be focused, in order to create a slim ,
     soft and focus line of spraying, the low pressure air is introduced from the quick connector of the Narwhale¡¯s
     Soniaccu ultrasonic nozzle, this air flow along the channel of the nozzle housing and cross diffuser of the
     Soniaccu ultrasonic nozzle, pass through the shrinking channel around the horn and then become a focus
     slim line before the horn tip, this focus slim string of the air will induce the atomized droplets forming an
     focus slim liner spraying pattern, the diameter of this slim line is 1.8mm~6.5mm depending the air pressure
     and the volume of atomizing liquid, the air pressure must be low, usually will not exceed 4PSI(gauge),
     the user can adjust the pressure of the air to get the satisfied spraying pattern. 


    We do not suggest higher air pressure, the higher pressure will create much impact force on the workpiece. The compressed air flow through a individual channel which is sealed
   from the piezo- transducer , this type of design will help extending the life of the nozzle.
   Note: the low pressure air should be disposed with oil water separation, if not the precipitated water may cause the atomization stop.                         





      Tested in water;
     **It is the temperature of the piezoelectric, not the environment temperature;
     ***Other inlet can be ordered;
     ****Mounting Brace can be ordered;